Bowa ARC 350 - Bipolar coagulation modes

5 Operation
52 Operating Manual ARC 350 900-351_IFU_V2.0.0_20221-S0-20150520-EN
5.8.3. Bipolar scissors
This mode is used with bipolar scissors. It can be used for coagulation before or
during cutting, point coagulation, coagulation of cuts and surface coagulation.
Application areas
Preparation, coagulation and cutting of tissue
Suitable instruments
 Bipolar scissors
Bipolar scissors should only be operated with the current type bipolar
scissors cutting or bipolar scissors coagulation.
5.9. Bipolar coagulation modes
5.9.1. Standard forceps
This mode is used for arcless contact coagulation with forceps.
Application areas
Bipolar coagulation
Suitable instruments
 Bipolar forceps
5.9.2. Standard forceps AUTO
This mode is used for arcless contact coagulation with forceps. Activation starts
automatically on contact with tissue.
Figure 5-12: AUTOSTART at socket 3