5 Operation
42 Operating Manual ARC 350 900-351_IFU_V2.0.0_20221-S0-20150520-EN
5.6.6. MetraLOOP
This mode is used in gynaecology for laparoscopic hysterectomy. Removal of the
uterus can be achieved by applying monopolar cutting current and pulling on the
snare at the same time.
Application areas
Gynaecology; laparoscopic hysterectomy
Suitable instruments
Gynaecological laparoscopic snares
5.6.7. Laparoscopy
This mode is used in laparoscopy and arthroscopy for monopolar cutting.
Application areas
Laparoscopy, arthroscopy
Suitable instruments
Arthroscopy electrodes
Laparoscopy electrodes
5.6.8. GastroLOOP 1 (optional)
This mode is used in gastroenterology. Polypectomy snares are used for cutting
and coagulation. ARC control generates the cutting effect with simultaneously
minimized output power. This mode consists of a series of cutting current pulses
followed by a coagulation phase. With a relatively slow pulse rate of 1 cutting pulse
per second, this mode is suitable for especially cautious work.
Application areas
Polyp removal using polypectomy snares and flexible endoscopy
Suitable instruments
Polypectomy snares
This function is available if the device has the options argon / GastroCut
(900-391).
To Next Page
Loading...
