Bowa ARC 350 - Specifying power limits; Selecting the effect

5 Operation
900-351_IFU_V2.0.0_20221-S0-20150520-EN Operating Manual ARC 350 33
5.4.2. Specifying power limits
Figure 5-6: Power limit monopolar cutting
1. To select the maximum power tap the parameters below the display
“max. Watt”.
2. Use the "+" and "-" buttons to adjust the power level.
3. Confirm your selection by pressing the "OK" button.
- or -
To return to the main screen without changing the selection, tap any button
outside the selection menu.
5.4.3. Selecting the effect
Figure 5-7: Effect monopolar cutting
1. To select the maximum power tap the parameters below the display "Effect".
2. Use the "+" and "-" buttons to adjust the effect.