Brady BBP 37 - Upgrade from USB Flash Drive

Printer Maintenance
Rev A 191 BBP
®
35/37 User’s Manual
Upgrade from USB Flash Drive
To upgrade your printer firmware to a new version that is stored on a USB flash drive:
CAUTIONCAUTION
Do not interrupt power during an upgrade from a USB flash drive .
1. Connect the USB flash drive to any available USB port on the printer.
2. Press Menu .
3. In the menu list, select More Tools .
4. Select Upgrade from USB drive .
Note: If there are unsaved changes in the currently active file, the system will
prompt you to save the file before continuing with the upgrade. Select Yes, No or
Cancel.
5. At the prompt to continue with the upgrade, select Yes .
The printer will go into upgrade mode and restart after the upgrade is complete.