Brady BBP 37 - Page 211

Troubleshooting
Rev A 195 BMP
®
35/37 User’s Manual
Ribbon Errors (continued)
Ribbon Out (roll reached purple
trailer).
Error Number 58
Ribbon out. Ribbon is at end of
roll and has reached the purple
trailer while actively printing.
Replace ribbon and close printer
cover.
Either resume the current or next
print job.
Text too long for more than one
color.
Press any key to continue.
1. Occurs when a continuous color
monochrome ribbon is installed
and the printer detects a second
color in a new area. If the
existing text is already longer
than the supported maximum
label length, user is prompted to
replace the ribbon.
2. Occurs when a continuous color
monochrome ribbon is installed
and a second color is added to
the label. If the existing text
already exceeds the maximum
for multi-color output, user is
prompted to replace the ribbon.
Note: In both of these examples,
the only way to successfully print
the label is to use monocolor
ribbons and swap them out between
passes.
Replace ribbon.
‘Error reading ribbon memory
cell. Insert ribbon memory cell
again or replace ribbon'.
Ribbon memory cell cannot be
read.
- or -
There is no ribbon installed.
Reinstall ribbon
Problem Cause Corrective Action