System Defaults
Rev A 21 BBP
®
35/37 User’s Manual
5. Using the keyboard, enter the desired year.
OR
Touch the up or down arrows of the toggle button to increase or decrease the year number.
6. To exit out of the year data field, touch anywhere on the calendar.
Once the correct month and year have been selected, to change the date:
7. Touch the desired date in the displayed calendar.
You will be returned to the Date data field on the Clock Settings screen.
Set the Time
To set the time, on the Clock Settings screen:
1. Touch the hour, minute, or seconds section in the Time: data field.
2. Using the keyboard, enter the desired hour, minute, or seconds.
OR
Touch the up/down arrows of the toggle button to the right of the Time: field to increase or
decrease the time.
Note: Entering seconds may prove futile as seconds pass quickly. The internal
clock in the printer starts the seconds based on the minutes you have chosen.
Time is based on a 12-hour clock, so you must indicate A.M. or P.M.
Touch the A.M. (or P.M.) section of the Time: data field. The data automatically toggles to
A.M. or P.M., depending on which option is currently displayed in the field.
3. When finished setting the Clock Settings defaults, press OK .
The date and time set in Clock Settings are stored on the printer and automatically increment
forward to the current date or time, even when the printer is turned off. This date and time can
be stamped on your labels when printing. However, you can enter any date or time, in any
format, on a label. Entered data is not affected by the internal clock.
To Next Page
Loading...
