4-2
CONTROLLER PROGRAMMING
Check oil level before
turning cook/filter switch
to COOK.
Action: Turn cook/filter switch to
COOK.
Response: Display alternates
between number values for cook tem-
perature, cook time and LO (idle
mode). LO will disappear when oil
temperature has reached cook tem-
perature value.
Action: Press one of three program
buttons once.
Response: Display reads pro-
grammed value of button pressed.
Display will return to idle mode after
five seconds.
Set Temperature:
Action: Press cook temperature but-
ton twice within one second.
Response: Programming mode has
been entered. Flashing display reads
“###F.” (### = temperature value ie:
360F)
Action: If desired, turn rotary knob to
change displayed value. Press cook
temperature button to enter new value
into memory.
Response: Controller returns to idle
mode.
Set Time:
Action: Press cook time button twice
within one second.
Response: Programming mode has
been entered. Flashing display reads
“##:##.” (##:## = time value ie: 08:00)
Action: If desired, turn rotary knob to
change displayed value in fifteen sec-
ond increments. Press cook time but-
ton to enter new value into memory.
Response: Controller returns to idle
mode.
AUTO COMP (Automatic Time Compen-
sation):
Action: Press AUTO COMP button
twice within one second.
Response: Programming mode has
been entered. Flashing display reads
ON or OFF.
Action: If desired, turn rotary knob to
change displayed value. Press AUTO
COMP button to enter new value into
memory.
Response: Controller returns to idle
mode. WARNING DISPLAYS.
broaster.com Manual #14680 3/99 Rev 5/14
To Next Page
Loading...
