6-7
SAFETY RELIEF VALVE
The safety relief valve opens in the event
pressure in the cooking well meets relief
pressure rating of the valve. DO NOT alter
or attempt to repair this valve.
Keep away from safety
relief valve opening with-
out heat and steam protective apparel.
Escaping steam could cause serious
burns.
1. See PROPER COVER OPERATION.
Replacement:
Replacement valve must
have a 15 PSI relief pres-
sure.
1. OPEN cover and pressure regulating
valve.
2. Unscrew valve (1) from the cover.
DO NOT install valve dis-
charge opening in the
direction of foot traffic areas.
3. Apply teflon tape to threads. Screw
new valve into the cover with valve
discharge opening facing the rear, at
an angle, away from foot traffic as
shown below.
broaster.com Manual #14680 3/99 Rev. 5/14
To Next Page
Loading...
