To Next PageTo Next PageHow to fix timer that will not time on Broaster Fryer?
If the timer on your Broaster Fryer isn't working, it might be because: * The controller is in program mode. Exit program mode. * The pressure regulating valve is open. Close it. * The microswitch is faulty or out of adjustment. Replace or adjust it.
Why hi-limit will not reset on Broaster 2400 Fryer?
If the hi-limit won't reset on your Broaster Fryer, it could be due to: * The cooking oil temperature being too high. Allow the oil to cool to approximately 100°F. * A faulty hi-limit. Replace it.
What to do if the HEAT ON light is not illuminated on Broaster 2400 Fryer?
If the HEAT ON light is not illuminated on your Broaster Fryer, here are some possible reasons: * The controller might be in program mode. Exit program mode. * The light or controller could be faulty. Replace the controller. * The temperature control might be faulty. Replace it.
What to do if the heating element(s) won’t heat on Broaster 2400 Fryer?
If the heating element(s) won’t heat in your Broaster Fryer, consider these potential causes: * The controller might be in program mode. Exit program mode. * The element(s) could be faulty. Replace them. * A faulty contactor could also be the issue. Replace it.
What to do if the POWER ON light is not illuminated on Broaster 2400 Fryer?
If the POWER ON light is not illuminated on your Broaster Fryer, it could be due to several reasons: * The hi-limit might have tripped. Try to reset or replace it. * The light itself could be faulty. In this case, replace it. * The cook/filter switch might be faulty. Try replacing it. * A faulty fuse may also be the cause. Try replacing it.
Why is the cooking oil temperature too hot or too cold in my Broaster Fryer?
If the cooking oil temperature in your Broaster Fryer is too hot or too cold, there could be several reasons: * The controller might be in program mode, so exit program mode. * There may be an issue with the controller calibration. In this case, see CALIBRATION. * A faulty contactor, controller, temperature sensor probe, gas valve, or element(s) could also be the cause. If any of these are faulty, replace them.
What causes excess pressure in my Broaster Fryer?
To address excess pressure in your Broaster Fryer, turn the cook/filter switch OFF and contact a service person.
Why is there no pressure in my Broaster Fryer?
If there is no pressure in your Broaster Fryer, here are a few things to consider: * The pressure regulating valve may be OPEN; CLOSE it. * The pressure regulating valve may be dirty or blocked open; contact a service person. * There may be leaks around the cover O-ring; replace the O-ring.
What to do if pressure gauge does not indicate rising pressure on Broaster Fryer?
If the pressure gauge on your Broaster Fryer does not indicate rising pressure when the exhaust valve is closed: * The port may be plugged; clean the port on the bottom of the cover. * The pressure gauge may be damaged; replace the pressure gauge.
Why won't the pilot burner ignite on my Broaster Fryer?
If the pilot burner of your Broaster Fryer will not ignite, check these potential causes: * The gas valve is OFF; slide the switch to ON. * There is air in the pilot gas line (refer to “2400GH LIGHTING”). * The gas shut-off valve is OFF; turn it ON. * The incoming gas pressure is too high; install a regulator to control gas pressure.
Explains the importance and location of safety signs on the equipment.
Provides contact information for obtaining replacement warning labels and manuals.
Specifies the correct voltage requirements for different Broaster models.
Electrical connection diagrams for the 3-phase 2400E General Power model.
Details the power switch function and the overheat protection hi-limit control.
Introduces the main touch screen interface and its basic operational functions.
Explains the functions and settings available within the Cook tab.
Describes the controls and procedures for operating the oil filtering system.
Details configuration options like date, time, temperature units, and settings.
Provides access to instructional guides, service contacts, and cleaning procedures.
General procedures for safely accessing internal components of the power input box.
Details on the timer switch function, adjustment, and replacement steps.
Explains the function of the control rod and provides steps for its removal.
Information and testing procedures for the 2400GH model transformer.
Details on primary and secondary contactors and their voltage checks.
Information on fuses protecting the control and filter circuits and their replacement.
Procedures for checking and replacing the heating elements in the 2400E model.
Details on the function of pre-heat relays and testing procedures.
Overview of the components related to the fryer's cover, yoke, and lift assembly.
Guidelines for safe and correct opening and closing of the fryer cover.
Details on gas springs and procedures for height and centering adjustments.
Step-by-step instructions for safely removing the cover and yoke assembly.
Detailed breakdown of the cover and yoke components after removal.
Procedures for correctly reassembling the cover and yoke components.
Instructions for removing the fryer's lift assembly from the unit.
Procedures for replacing slide rods and bearings within the lift mechanism.
Information on the pressure gauge and safety relief valve and their replacement.
Details on the exhaust drain tube's function and cleaning the exhaust tank.
Information on the exhaust tube and the function/replacement of the pressure regulating valve.
Detailed procedures for repairing the pressure regulating valve.
Specifications for burner orifices and procedures for gas conversion.
Procedures for lighting the unit and details on the gas valve operation.
Importance of proper ventilation and how to check gas valve power.
Procedures for adjusting gas pressure and burner flame characteristics.
Steps for replacing the main burner orifice.
Steps for replacing the pilot burner orifice.
Procedures for cleaning the combustion chamber and related components.
Step-by-step instructions for replacing the oil drain valve.
Information on filter pan assembly and preventive maintenance procedures.
Procedures for replacing the check valve in the oil system.
Instructions for replacing the pump motor, including installation hints.
Steps for removing the oil pump and procedures for its cleaning.
Common electrical issues, their causes, and remedies.
Troubleshooting tips for issues related to the smart touch controller display and function.
Common problems related to the gas system and their solutions.
Troubleshooting common issues with the cover, yoke, and slide mechanisms.
Diagnosing and resolving issues related to the fryer's pressure system.
Common problems related to product cooking quality and their remedies.
Specific troubleshooting for problems encountered when cooking frozen IQF chicken.
Troubleshooting common issues encountered with the oil filtering system.
General| Model | 2400 |
|---|---|
| Category | Fryer |
| Type | Pressure Fryer |
| Power Source | Electric |
| Frequency | 50/60 Hz |
| Material | Stainless Steel |
| Controls | Digital |
| Voltage | 208-240 V |
| Temperature Control | Thermostatic |
| Pressure | 12 psi |
| Safety Features | Pressure Relief Valve, Overheat Protection |
