Polycold Cryochiller
Installation and Operation Manual
Brooks Automation
214072 Revision B
1-1
1 Introduction
Using This Manual
This product is intended for use by industrial customers and should be serviced only by Brooks or
Brooks trained representatives. The manuals and related materials are provided in English at no charge
and are intended for use by experienced technicians. It is the responsibility of the user to obtain and
assure the accuracy of any needed translations of manuals. If you require assistance please contact
Brooks service department. Contact information can be found at: www.brooks.com.
This manual provides information for a wide variety of Polycold Cryochiller configurations. Some of the
features that are shown are optional and may not be installed on your system. Refer to Brooks Automa-
tion sales literature to determine what items are optional.
There may be additional installation, maintenance, troubleshooting, and repair information in other
manuals which may affect the settings or operation of the Polycold Cryochiller. When integrated in a
system, the Polycold Cryochiller may be set to system specifications. Before adjusting or changing set-
tings, consult the appropriate system documentation.
All documents that are referenced in this manual refer to documents of the latest revision as of the pub-
lication date of this manual. Brooks Automation Technical Support issues Technical Support Bulletins
(TSBs) to notify the owners of record of any field retrofits.
Pressures are stated as gauge (i.e., psig) not absolute. Psig is pounds per square inch gauge and kPa
is Kilopascals gauge. kPa = 6.895 x Psig. bar = Psig ÷ 14.5
The Polycold Cryochiller contains high voltages and other hazards
which, if not properly handled, may result in death or serious injury.
Only trained and qualified personnel should work on the Polycold
Cryochiller.
Do not perform installation, operation, or maintenance procedures
on the Polycold Cryochiller unless you have read and understand
the information in the Safety chapter of this manual.
To Next Page
Loading...
