Brooks Polycold MaxCool Series - Network_Mask; Devicenet_Params; Devicenet Parameters

Polycold Cryochiller Host Commands
Installation and Operation Manual System Configuration Commands
Brooks Automation
214072 Revision B
7-11
NETWORK_MASK Network Mask
DEVICENET_PARAMS DeviceNet parameters
Purpose: Get/set the subnet mask for the system.
Parameter(s): ? or [nnn.nnn.nnn.nnn]
[nnn.nnn.nnn.nnn] is the Network Mask address
Return Value: [A] or [A][nnn.nnn.nnn.nnn]
Default Value: 0.0.0.0
Security Level: Get: 1 Set: 3
Example: “NETWORK_MASK,255.255.255.0” Set the subnet mask for host port
Interface RS-232, Ethernet
Purpose: Set / Get the DeviceNet speed and mac id
Parameter(s): ? or [speed],[Mac ID]
[speed] is
- 0 = 125k
- 1 = 250k
- 2 = 500k
[Mac ID] is
0 - 63
Return Value: [A] or [A][speed],[Mac ID]
Default Value: A,63
Min: [speed] = 0
[Mac ID] = 0
Max: [speed] = 2
[Mac ID] = 63
Security Level Get: 1 Set: 3
Example: “DEVICENET_PARAMS,?”
Interface RS-232, Ethernet