Brooks Polycold MaxCool Series - Circuit Operational State Commands; Operating_Mode_Def_Cool; Operating_Mode_Def_Defrost

Host Commands Polycold Cryochiller
Circuit Operational State Commands Installation and Operation Manual
Brooks Automation
7-36 214072 Revision B
Circuit Operational State Commands
OPERATING_MODE_DEF_COOL Cool operating mode default state
OPERATING_MODE_DEF_DEFROST Defrost operating mode default state
Purpose: Get/set the operating mode’s default cool state.
Parameter(s): [n],?
or [n],[mode]
[n] is the circuit number (1or 2)
[mode] is
0 = COOL
1 = Not Used
2 = Not Used
3 = Not Used
4 = Not Used
5 = Not Used
Return Value: [A][mode]
Default Value: N/A
Security Level Get: 1 Set: 2
Example: “OPERATING_MODE_ DEF_COOL,1,?” Get the current default cool
mode.
Interface RS-232, Ethernet
Purpose: Get/set the operating mode’s default defrost state.
Parameter(s): [n],?
or [n],[mode]
[n] is the circuit number (1 or 2)
[mode] is
0= DEFROST
1 = Not Used
2 = Not Used
3 = Not Used
4 = Not Used
5 = Not Used
Return Value: [A][mode]
Default Value: N/A
Security Level Get: 1 Set: 2
Example: “OPERATING_MODE_ DEF_DEFROST,1,?” Get the current default
defrost mode.
Interface RS-232, Ethernet