What to do if my Brother ADS-1300 displays 'Wrong Password' for Secure Function Lock?
If your Brother Printer displays 'Wrong Password' when using Secure Function Lock, enter the correct password. If you still have issues, contact your administrator to check your Secure Function Lock settings.
What to do if my Brother ADS-1300 displays 'Wrong Password' for Setting Lock?
If your Brother Printer displays 'Wrong Password' when using Setting Lock, enter the correct password. If you forgot it, you must reset it.
What to do if my Brother ADS-1300 displays 'USB Host is write protected'?
If your Brother Printer displays 'USB Host is write protected', remove the write-protected USB flash drive, press 'Close', and then either turn off the USB flash drive’s write-protection or use a USB flash drive that is not write-protected.
What to do if my Brother ADS-1300 Printer displays 'Wrong Network Key'?
If your Brother Printer displays 'Wrong Network Key', confirm the Network Key and try again.
What to do if my Brother ADS-1300 Printer says 'Insufficient USB Storage'?
If your Brother Printer shows 'Insufficient USB Storage', press 'Close' and either delete unused files from the USB flash drive or use a USB flash drive with more free space.
How to fix 'Card JAM' on Brother ADS-1300?
To resolve the 'Card JAM' error on your Brother Printer, remove the plastic card. To prevent future jams: - Do not leave the card inserted in the machine. - Insert embossed cards with the embossed side up. - Insert the plastic card straight according to the guidelines.
To Next Page
General
