Brother DCP-L2500D - If You Replace the Low-Voltage Power Supply Pcb Assy; Reset Irregular Power Supply Detection Counter of the Low-Voltage Power Supply PCB (Function Code: 88)

4-6
Confidential
2. IF YOU REPLACE THE LOW-VOLTAGE
POWER SUPPLY PCB ASSY
 What to do after replacement
• Reset Irregular Power Supply Detection Counter of the Low-voltage Power Supply PCB
(Function code: 88)
 What you need to prepare
None
2.1 Reset Irregular Power Supply Detection Counter of the
Low-voltage Power Supply PCB (Function code: 88)
Refer to “1.3.29 Reset irregular power supply detection counter of low-voltage power supply
PCB (function code: 88)” in Chapter 5 to reset the irregular power supply detection counter.