Brother DCP-L2500D - Set Country; Language (Function Code: 52)

5-25
Confidential
1.3.14 Set country / language (function code: 52)
<Function>
This function is user accessible, and is used to customize the EEPROM according to the
language, function settings, and firmware switch settings.
<Operating Procedure>
Note:
• This function can be used only in the following nations: Around France, Pan-Nordic,
East Europe, and Iberia.
For models without keypad
(1) Press the [▲] or [▼] key in the initial
state of maintenance mode to display
"MAINTENANCE 52" on the LCD, and
press the [OK] key. "Set Country" is
displayed on the LCD.
(2) Press the [▲] or [▼] key to select the
country to be shipped, and then press
the [OK] key.
(3) Press the [▼] key. The new setting is
saved. Once the saving is completed,
the machine returns to the ready state.
For models with keypad
(1) Press the [5], and then the [2] key in the
initial state of user maintenance mode.
"Set Country" is displayed on the LCD.
(2) Select the country to be shipped, and
then press the [SET] or [OK] key.
(3) Press the [Yes] key. The new setting is
saved. Once the saving is completed,
the machine returns to the ready state.
Italia
España
Portugal
ITALY/IBERIAAround France PAN-NOLDIC
France
België / Belgique
Nederland
M.East & Africa
Türkiye
Ceska republika
Magyarorsazág
POLSKA
България
România
Slovensko
Slovenija
Hrvatska
Others
Norge
Sverige
Suomi
Danmark
Others
CEE
Middle East And
North Africa