Brother DCP-L2500D - Appendix 2 Deleting User Setting Information

App. 2-1
Confidential
APPENDIX 2 DELETING USER SETTING
INFORMATION
The user setting information for the machine is stored in the main PCB. You can return this to
the default settings by following the procedure below.
<Operating Procedure>
For models without touch panel
(1) Press the [Menu] key while the
machine is in the ready state.
(2) Press the [▲] or [▼] key to display
"General Setup" on the LCD, and
press the [OK] key.
(3) Press the [▲] or [▼] key to display
"Reset" on the LCD, and press the
[OK] key.
(4) Press the [▲] or [▼] key to display
"All Settings" on the LCD, and press
the [OK] key.
(5) "Reboot OK?" appears on the LCD.
Press the [OK] key to delete the user
setting information and return the
machine to the ready state.
For models with touch panel
(1) Press the [Settings] key while the
machine is in the ready state.
(2) Press the [All Settings] key on the
LCD.
(3) Press the [Initial Setup] key on the
LCD.
(4) Press the [Reset] key on the LCD.
(5) Press the [All Settings] key on the
LCD.
(6) "Reset All Settings? Yes No" appears
on the LCD. Press the [Yes] key.
(7) "Reboot OK? Press [Yes] for 2
seconds to confirm." appears on the
LCD. Press and hold the [Yes] key for
2 seconds or longer to delete the user
setting information and return the
machine to the ready state.