App.2-1
Confidential
APPENDIX 2 DELETION OF USER SETTING
INFORMATION
In this machine, the user setting information is stored in the main PCB. The following
procedure allows the factory default settings to be restored in the machine.
<Operating procedure>
(1) Press the (Settings) key on the LCD in the ready state.
(2) Press the All Settings key on the LCD.
(3) Press the Initial Setup key on the LCD.
(4) Press the Reset key on the LCD.
(5) Press the Factory Reset key on the LCD.
(6) When “Factory Reset? It may take time until reset finishes. Yes No” is displayed on the
LCD, press the Yes key.
(7) When “Reboot OK? Press [Yes] for 2 seconds to confirm.” is displayed on the LCD, hold
down the Yes key for 2 seconds or more. Then, the user settings are cleared, and the
machine returns to the ready state.
To Next Page
Loading...
Need help?
General
