2-60
Confidential
â– Error code 7100
After the registration rear sensor detects the end of paper pass and the specified period of
time has passed, the eject sensor continues to detect paper pass.
< User Check >
- Remove the jammed paper.
- Check if the back cover is not open during 2-sided printing.
Jam Rear
Open the Back Cover and remove the jammed paper, then press [Start].
Step Cause Remedy
1 Foreign object at the back of the
machine
Remove the foreign object.
2 Eject actuator caught on some
position
Re-assemble the eject actuator.
3 Fuser cover installation failure Re-assemble the fuser cover.
4 Back cover installation failure Re-assemble the back cover.
5 Eject sensor failure Replace the eject sensor PCB ASSY.
6 Back cover failure Replace the back cover.
7 Fuser drive gear Z25 damaged Replace the fuser drive gear Z25.
8 Paper eject ASSY failure Replace the paper eject ASSY.
9 Paper feed related gear
damaged
Replace the main drive unit.
10 Fuser unit failure Replace the fuser unit.
11 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
Need help?
General
