Check Action
Windows:
Ask your administrator about the IP address and the subnet mask, and then use the
Network Connection Repair Tool.
Mac:
Confirm that the IP address and the Subnet Mask are set correctly.
Check that your Brother
machine is connected to the
wireless network.
Print the WLAN Report to check the error code on the printed report.
If you have checked and tried all of the above but you are still having problems, see the instructions supplied with
your wireless LAN access point/router to find the SSID (Network Name) and the Network Key (Password)
information and set them correctly.
Related Information
• Network Problems
Related Topics:
• Print the WLAN Report
• Print the Network Configuration Report
• Wireless LAN Report Error Codes
• Configure Your Wireless Direct Network
176
To Next Page
Loading...
