125
Basic printing procedures
(3) Orient the pour spout of faucet in the position as shown in the figure below.
X0081
(4) Lean the entire shipping carton of pretreatment toward a container for dilution to pour the agent into the container,
and dilute it with pure water.
<IMPORTANT>
Use with the dilution rate of x3 (Pretreatment:Pure water=1:2) (Volume ratio).
Close the cap of the container for dilution, and shake it sufficiently to provide equal concentration.
X008
(5) To provide safekeeping for the pretreatment, close the faucet, place the pretreatment with the faucet part facing
upward, and store the entire carton in a safe place.
Pretreatment
Faucet
Pretreatment
Pure water
Container for dilution
To Next Page
Loading...
