Brother GTX pro - Printer Connection to PC (Windows)

44
Installation and preparation
4-3. Connection between Printer and PC (for Windows)
This chapter provides information about the procedures to install the GTX pro printer driver onto your PC and connection
method of the printer to PC.
For Windows 8.1 and 10, different dialog boxes may be displayed. Proceed with the next step while checking each
procedural step.
"4-3-1. Installing printer driver onto your PC >>P.45"
When connecting via
USB
Add a Printer to PC
"4-3-2. Connect with
USB2.0 cable: Adding the
i t t th PC >>P 46"
Set static IP
address on PC
Printer static IP Address
Set
"4-3-3. When connecting via
LAN: Static IP address setting
>>P.48"
Printer static IP Address
Set
"8-17. Static IP address setting
>>P.238"
Add a Printer to PC
"4-3-4. When connecting via LAN: Adding a printer to PC >>P.52"
"7-4-1. CR (Carriage) speed adjustment >>P.216"
"7-4-2. Initial settings after head replacement >>P.217"
"7-4-3. Firing adjustment >>P.218"
"7-4-4. Platen-rolling adjustment >>P.219"
"7-4-5. White/color alignment >>P.220"
When connectin
g
via LAN
Installing the printer driver
Adjusting Printer
Set static IP address on
Printer main unit