219
Precautions to keep good printing quality/use printer over the long term
7-4-4. Platen-rolling adjustment
Platen feed adjustment should be performed after replacing the print head or completing the set up procedure.
If you want to make adjustments after replacing the print head, configure the initial settings after print head replacement
and adjust the firing timing before you do so.
(1) Make several sheets of A4-size or letter-size white paper available for use.
(2) Make sure that a connection of USB 2.0 cable or LAN cable is made between the printer and your PC.
(3) On the PC, from [All Programs] in the Start menu, select the "GTX pro Maintenance" from "Brother GTX pro Tools".
(4) When the window shown below is displayed, select [Platen-rolling adjustment] and click [Next].
(5) Perform the required operation by following the on-screen instructions in the dialog box.
After the adjustment is completed, the currently displayed screen will go back to the window mentioned above.
To Next Page
Loading...
