Brother GTX pro - Other Items You Must Make Available for Use

22
Before Using Your Printer for the First Time
1-3. Other items you must make available for use
What you buy from our distributors
 Ink pouch
 Maintenance solution pouch *Only if white ink is not used
 Cleaning solution
 Pretreatment
Others
 USB 2.0-compliant device cable (A/B)
<NOTE>
 Using other cables than the specified one may cause the printer to be rendered inoperative. Do not use any extension
cable.
 LAN cable (10BASE-T/100BASE-TX)
 USB flash memory
Please use a FAT32-formatted USB flash memory of which storage capacity is 2 GB to 32 GB in total. You
cannot use a USB memory with security functions such as password lock function or beyond 32 GB.
 Pure water
It refers to such water as distilled water and purified water, which is used to dilute the pretreatment with it.
<NOTE>
 Avoid using such water as tap water in which impurities are contained.
 Heat press
It must deliver the performance through which the print range of the size of a platen to be used can be
covered and 180°C (356°F) can be kept for 35 seconds or more. At a fixing stage of the pretreatment, be
sure to use the heat press, but not an oven, to smoothen the surface.
 Peel-off sheet
Always use this sheet to flatten the fixed surface and enhance the peel property when fixating the
pretreatment and ink by means of the heat press. ☞"6-3-1. Provisions for pretreatment >>P.121".
 Silicone foam (of open-cell structure)
It is the foamed mattress which resists heat. Use this at a fixing stage through the use of the heat press.
 Adhesive roller
Use these to remove lint from a T-shirt or debris from its surface.