124
Basic printing procedures
6-3-2. Dilution of pretreatment
Be sure to use the pretreatment after diluting it with pure water.
<CAUTION>
Be sure to wear a pair of plastic gloves and protective glasses during the work operation.
For information on handling of the pretreatment, see the Material Safety Data Sheet issued by us.
http://sds.brother.co.jp/sdsapp/index.html
Dilution ratio
Use within the ratio range of x3 (Pretreatment:Pure water=1:2) (Volume ratio).
Dilution method
<TIPS>
The figure below is based on the pretreatment (20 kg (44 lb)). When using the pretreatment (5 kg (11 lb)), remove the cap and
pour the agent into the container, and dilute it with pure water, referring to step (4) and the subsequent steps. Dilution ratio is the
same.
(1) Unpack the pretreatment container from the shipping carton by cutting off the perforated paper along the perforated
tear-off line to open the carton.
X0079
(2) Remove the cap, and place the cap in position.
X0080
Pretreatment
Faucet
Cap
Pretreatment
To Next Page
Loading...
