Brother GTX pro - Using External Applications for Print Data

70
Creating print data
5-3. Using other applications
5-3-1. When using CorelDRAW
First of all, perform the following procedures:
 Color setting
 Print size
As required, perform the following procedures:
 Create print data (ARXP file)
 Use the color palette in Useful Tools.
 Convert data to bitmap image data
 Replace RGB=255 in bitmap image data with RGB=254
<TIPS>
 For this printer, it is recommendable to use CorelDRAW 2018/2019. The display screen is described assuming CorelDRAW
2019.
Color management settings
(1) In the menu bar, select [Tools] > [Color Management].
(2) Establish the settings of [Color Management Settings] as follows:
 [RGB profile]: [sRGB IEC61966-2.1]
 [Primary color mode]: [RGB]
 [Rendering intent]: [Relative colorimetric]