Brother GTX pro - Page 139

139
Basic printing procedures
(3) Attach the platen height adjustment lever to the platen bearing.
<CAUTION>
 Attach the platen height adjustment lever to the position as illustrated in the figure below. The lever installed in
the wrong position will interfere with the stopper when the platen is attached.
<TIPS>
 When adjusting the height, put the latch of the platen height adjustment lever into the groove of the platen
bearing.
X026
2
Platen height adjustment
lever
Platen bearing
Latch
Groove
Platen height adjustment
lever
Stopper