Brother GTX pro - Page 143

143
Basic printing procedures
(4) Attach the collar.
X026
8
(5) Attach the platen height adjustment lever to the platen bearing.
<CAUTION>
 Attach the platen height adjustment lever to the position shown below. The lever installed in the wrong position will interfere
with the stopper when the platen is attached.
<TIPS>
 When adjusting the height, put the latch of the platen height adjustment lever into the groove of the platen bearing.
X026
9
Platen height adjustment
lever
Latch
Groove
Collars
Platen height adjustment
lever
Stopper