Brother GTX pro - Page 179

179
Precautions to keep good printing quality/use printer over the long term
(4) Wipe the resin part between the print head's nozzle surface and nozzle guard.
<IMPORTANT>
 Be sure not to touch the red-frame zone of the nozzle surface.
 For cleaning, be sure not to use any tool other than clean stick R.
X023
7
Cleaning conditions
Pre-cleaning state Post-cleaning state
<IMPORTANT>
 Be sure to use the clean stick R separately for white ink and color ink.
<TIPS>
 There may remain white ink in the black resin part, but it doesn't matter if the severity is small as shown in the photo. Wipe away
the white ink spreading out of the nozzle guard and nozzle surface.
Clean this part
Cleaning location
Between the nozzle surface and nozzle guard
Cleaning location
Between the nozzle surface and nozzle guard
Nozzle surface
Nozzle guard
X0238
Cleaning location
Between the nozzle surface and nozzle guard