249
Troubleshooting
The power cannot be turned on
Probable Cause Remedy Reference
Is the power cord connected to
the printer?
Make sure that the power cord is connected to the
printer.
-
Is the front cover closed firmly? Close the front cover properly. -
An error occurs immediately after activating the printer
Probable Cause Remedy Reference
Is any error message displayed? Check the content of the error, and restart the printer.
If the error is still not eliminated, please contact your
dealer or Brother.
"10. Error message
>>P.311"
No print data can be loaded from USB flash memory
Probable Cause Remedy Reference
Has the USB flash memory been
inserted into its insertion slot
properly?
Insert the USB flash memory into the insertion slot
firmly. -
Is the applicable file ARP or AR3
file?
This printer cannot print out the print data of
GT-541/GT-782/GT-3. Recreate the print data.
-
Is your USB flash memory suited
to required conditions?
Please use a FAT32-formatted USB flash memory of
which storage capacity ranges from 2 GB to 32 GB.
You cannot use a USB memory with security functions
such as password lock or beyond 32 GB.
-
Has your USB flash memory
been broken?
Check to see if it functions properly using your PC or
the like.
-
Neither uni-directional printing nor bi-directional printing can be performed
Probable Cause Remedy Reference
Do the settings of printer driver
and printer agree with each
other?
Note that the setting of the printer's setting has priority
over the setting of printer driver. The printer driver's
setup value takes effect only if the printer's setting is
[Auto].
"8-1. Setting the print
direction >>P.229"
To Next Page
Loading...
