273
Troubleshooting
X0253
(7) With a clean stick R, clean the surrounding area of nozzle surface of print head.
Manually move the carriage to such a position that you can perform the cleaning with ease.
<IMPORTANT>
Be sure not to bring the clean stick R into contact with the nozzle surface.
The used clean stick R should be disposed of, and should not be reused.
X029
(8) Close the front cover, turn on the power.
(9)
From the menu, select [Head Cleaning] > [Powerful Cleaning] > [All Print Heads], and press
.
<NOTE>
Dispose of any waste resulting from the cleaning in accordance with applicable laws and ordinances.
<TIPS>
Then, the head cleaning will be performed to prevent any ink from drying up.
Because the cleaning cup will be reused, rinse it in clean cleaning solution and store it in a safe place.
Cleaning conditions
Pre-cleaning state Post-cleaning state
Clean stick R
Nozzle surface
Surrounding area of nozzle
surface
Cleaning area
Cleaning
prohibited
area
To Next Page
Loading...
