Brother GTX pro - Page 275

275
Troubleshooting
(7) Remove the filter from the bracket.
X039
7
(8) Rotate the nut of the tube on the head side and remove the filter.
X043
7
(9) Place a new filter on the head side tube and fasten the nut.
<IMPORTANT>
 Install the filter with no stamp facing the tube. Pay attention to this installation orientation.
<NOTE>
 For a proper work operation, be sure to wear the printer-provided gloves.
X033
4
Nut
New filter
Without stamp
Head side tube
Nut
Filter
Filter
Bracket