Brother GTX pro - Page 316

316
Error message
Error code Error message Description Remedy Reference
2036 [Machine Error]
It is the read-out
trouble of an ink
pouch on the color
side.
Make note of their error code and
error message, and please notify
it to your dealer.
-
2037 [Machine Error]
It is the read-out
trouble of an ink
pouch on the white
side.
Make note of their error code and
error message, and please notify
it to your dealer.
-
2041
[No Wiper Cleaner
(CMYK)]
There is no wiper
cleaner on the color
side.
Place a wiper cleaner in position
on the color side.
-
2042
[No Wiper Cleaner
(White)]
There is no wiper
cleaner on the white
side.
Place a wiper cleaner in position
on the white side.
-
2050 [Temp Low]
The ambient
temperature
decreases below the
operation assurance
range for the best
print result.
Raise your room temperature.
"11-1. Apparatus >>P.350"
2051 [Temp High]
The ambient
temperature rises
above the operation
assurance range for
the best print result.
Lower your room temperature.
"11-1. Apparatus >>P.350"
2070
[Obstacle on the
Platen]
The obstacle sensor
has detected some
obstacle on the platen
or print medium.
Remove such obstacle from the
platen, flatten its surface, and
press to clear the error.
-
2071
[Obstacle detected
during printing]
Obstacle detected on
the Platen during
printing
Perform test printing and check
the ejection from the head for any
abnormalities.
If the ejection is abnormal,
immediately perform head
cleaning to rectify the abnormality.
-
2072
[Platen is too low.
Adjust it]
The platen was
detected to be too low
when attempting to
start printing.
The gap between the medium’s
print surface and the print head is
too large. Make adjustments by
raising the platen.
-
2080
[Black
Check the remaining
volume of the ink
pouch and winding]
(K) Pouch winding
failure
Check that the pouch is wound
correctly.
-