5-27
Confidential
1.3.16 Setting by country (function code: 74)
<Function>
This function is to customize the machine according to language, function settings, and
worker switch settings.
<Operation Procedure>
(1) Press the [ ] or [ ] button in the initial state of maintenance mode to display
"Maintenance 74" on the LCD.
(2) Press the [OK] button. The country code currently set is displayed on the LCD.
(3) Enter the first two digits of the country code.
Press the [ ] or [ ] button to select the numerical value for the first digit, and press the
[OK] button. The cursor moves to the second digit.
Press the [ ] or [ ] button to select the numerical value for the second digit, and press
the [OK] button. The cursor moves to the fourth digit.
(4) Enter the last two digits of the country code.
Press the [ ] or [ ] button to select the numerical value for the third and fourth digits
(invalid numbers are skipped), and press the [OK] button.
(5) Press the [Go] button. The new setting is saved, and "PARAMETER INIT" is displayed
on the LCD. The machine then returns to the initial state of maintenance mode.
(6) When the [Cancel] button is pressed during setting, the machine returns to the initial
state of maintenance mode without saving any changes that have been made.
Note:
• If there is no entry for a minute or longer, the machine returns to the initial state of
maintenance mode automatically, regardless of the display status.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
