5-42
Confidential
1.4.14 Change ON/OFF setting for duplex printing
This function allows you to change the duplex printing setting to ON or OFF. The setting
applied is reversed each time this mode is entered.
The setting currently applied can be determined by pressing the [Go] button seven times and
checking the LED status after several seconds. When the setting is completed, the machine
returns to the ready state.
1.4.15 Change A4/Letter setting for paper size
This function allows you to change the default paper size setting to A4 or Letter. The setting
applied is reversed each time this mode is entered.
The setting currently applied can be determined by pressing the [Go] button eight times and
checking the LED status after several seconds. When the setting is completed, the machine
returns to the ready state.
LED display Duplex printing setting
Toner and Drum LEDs light for one
second.
Duplex printing OFF → Duplex printing ON
LED does not light. Duplex printing ON → Duplex printing OFF
LED display Default paper size setting
Toner and Drum LEDs light alternately
for one second.
A4 → Letter
LED does not light. Letter → A4