2-43
Confidential
Error code 8A00
The registration front sensor does not detect paper pass within the specified time after the T1
paper feed sensor detected paper pass.
Error code 8B00
The registration front sensor does not detect paper pass within the specified time after the T2
paper feed sensor detected paper pass.
Jam Tray 1
Jam Tray 2
<User Check>
• Remove the paper jammed in the front section of the machine.
• Adjust the paper guide according to the paper size.
• Check that the thickness of the paper is 60 to 105 g/m
2
.
• Check that there is not too much paper set in the tray.
Step Cause Remedy
1
Foreign object in the front of the
machine
Remove the foreign object.
2
Registration front actuator
caught in some sections of the
machine
Reattach the registration front actuator.
3
Connection failure of the
registration front/rear sensor
harness
Check the connection of the registration front/
rear sensor harness, and reconnect it if
necessary.
4
Registration front sensor failure Refer to "1.3.8 Check sensor operation
(function code: 32)" in Chapter 5 to check the
sensor operation. If the sensor operation is
faulty, replace the registration front/rear sensor
PCB ASSY.
5 Main PCB failure Replace the main PCB ASSY.