ControlCenter2
184
OCR (word processing application) 10
Scan to OCR converts the graphic page image data into text which can be edited by any word processing
application. You can change the default word processing application.
To configure Scan to OCR, click the button while holding down the Ctrl key and choose Software Button.
To change the word processing application, choose the destination word processing application from the
Target Application pop-up menu. You can add an application to the list by clicking the Add button. To delete
an application, click the Delete button.
If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show
Scanner Interface box.
If you want to scan a multiple page document using the scanner glass, check the Manual multi-page scan
box.
If you want to scan a duplex document, check Duplex (two-sided) Scanning and choose
Long-edge binding or Short-edge binding. (For DCP-8155DN, MFC-8910DW and MFC-8950DW(T))
The Scan to OCR function is available for English, French, German, Dutch, Italian, Spanish, Brazilian
Portuguese, Danish, Swedish, Japanese, Korean, Traditional Chinese and Simplified Chinese.
To Next Page
Loading...
Need help?
General
