Brother MFC-8510DW User Manual

Network Scanning
258
13
Factory reset 13
You can reset the factory settings.
a Press Scan.
b Press Scan to E-mail.
c Enter the destination E-mail address.
Do one of the following:
 To enter the E-mail address manually, press Manual and go to step d.
 If you have stored the E-mail address to the machine’s address book, press Address Book and go
to step e.
Note
If your network supports the LDAP protocol, you can search for E-mail addresses on your server. (For
information on how to configure the LDAP protocol: uu Network User's Guide.)
d Enter the E-mail address.
Press to choose numbers, letters or special characters. Press OK.
Confirm the E-mail address. Press OK and go to step f. (For information on how to enter text: uu Basic
User's Guide.)
e Press a or b to choose the E-mail address.
You can also use the following search option.
Press to search by alphabetical order or numerical order. Press OK.
Confirm the E-mail address. Press OK and go to step f. (For more information on using the Address
Book: uu Basic User's Guide.)
f Press d or c to display Factory Reset. Press Factory Reset.
g Press Yes to confirm.
h Press Stop/Exit.

Brother MFC-8510DW Specifications

General

Brand	Brother
Model	MFC-8510DW
Category	All in One Printer
Language	English