Brother MFC-9010CN User Manual

Appendix B
170
B
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
MFC-9120CN B
The factory settings are shown in Bold with an asterisk.
4.Network
(continued)
1.TCP/IP
(continued)
0.IPv6 On
Off*
2.Ethernet — Auto*
100B-FD
100B-HD
10B-FD
10B-HD
0.Network
Reset
1.Reset 1.Yes
2.No
2.Exit
Main menu Submenu Menu selections Options
5.Network 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
Main menu Submenu Menu selections Options

Brother MFC-9010CN Specifications

General

Brand	Brother
Model	MFC-9010CN
Category	All in One Printer
Language	English