Brother MFC-9010CN - Printing the Network Configuration List

Control panel setup
80
6
Printing the Network Configuration List 6
Note
Node name: Node name appears on the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a (For MFC-9320CW) Press Menu. Press a or b to choose Print Reports. Press OK.
(For MFC-9120CN) Press Reports.
(For MFC-9010CN and DCP-9010CN) Press Menu. Press a or b to choose Machine Info.. Press OK.
b Press a or b to choose Network Config.
Press OK.
c (For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
Note
If the IP Address on the Nework Configuration List shows 0.0.0.0, wait for one minute and try again.