40
4
4
Configuration in Infrastructure mode 4
Before configuring the wireless settings 4
• The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows
®
found on the CD-ROM we have provided with the machine.
• If you are using Windows
®
XP, or currently using a computer connected to an access point/router by
network cable, you need to know the wireless settings.
• If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Restoring the network settings to factory default on page 79).
• You need to temporarily use a USB cable during configuration.
Wireless configuration for Windows
®
using the Brother installer application
(For MFC-9320CW)
4
Item Record the current wireless network settings
SSID (Network Name)
Network Key (Security Key/Encryption Key)
To Next Page
Loading...
Need help?
General
