Brother MFC-9140CDN - Page 301

3-138
Confidential
(7) Remove the five Taptite bind B M4x12 screws to remove the Main drive unit from the Side
frame L ASSY.
Fig. 3-195
Fig. 3-196
Note:
As the two gears (DX gear Z21 and PP gear Z14-51) shown in the figure tend to come off.
Be careful not to lose them.
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12
Main drive unit
Side frame L ASSY
<Left side>
Side frame L ASSY
DX gear Z21
PP gear Z14-51
<Back side> <Front side>