Brother MFC-9140CDN Service Manual

4-6
Confidential
(5) In "Port" on the BrUsbSn screen, select the port assigned to Brother Maintenance USB
Printer.
If the port number is unknown, follow steps below.
1) Click "Start" "Settings" "Printers". The Printers screen appears.
2) Right-click the Brother Maintenance USB Printer icon.
3) Click "Properties". The Brother Maintenance USB Printer Properties screen appears.
4) Click the Ports tab. The port for Brother Maintenance USB Printer is displayed.
(6) Enter the serial number (the fifteen digits) of the machine into the box on the "Serial No".
(7) Click the OK button, then confirmation screen appears. Check that the serial number and
click the Yes button.
1.5 Restore Machine Information (Function code 41)
Referring to "1.4.12 Backup of machine information" in Chapter 5, restore the backup data of
the machine information. If the data is successfully restored, the operations described in
sections 1.6 to 1.9 in this chapter are not necessary. If backup data is unavailable or you fail to
restore backup data, proceed to the operations described in sections 1.6 to 1.9 in this chapter.
1.6 Motor Reset (Function code 57)
Following the instructions provided in "1.4.19 Motor reset" in Chapter 5, perform motor reset.
1.7 Continuous Adjustments of Density and Registration
Sensor (Function code 73)
Perform continuous adjustments of density and registration sensor in accordance with
"1.4.28 Continuous adjustments of density and registration sensor" in Chapter 5.
1.8 Acquisition of White Level Data (Function code 55)
Perform the acquisition of white level data in accordance with "1.4.18 Acquisition of white level
data and setting of CIS scanning area" in Chapter 5.
1.9 Adjustment of Touch Panel (Function code 61)
Perform adjustment of touch panel in accordance with "1.4.20 Adjustment of touch panel" in
Chapter 5.
Memo:
Refer to APPENDIX 1 SERIAL NUMBERING SYSTEM to know how to read the serial
number label of the machine.
Memo:
In the Continuous adjustments of density and registration sensor (Function code 73),
Sensitivity adjustment of density sensor (Function code 72), Developing bias voltage
correction (Function code 83), and Adjustment of color registration (Adjustment of
inter-color position alignment) including registration sensor calibration (Function code 66)
are executed consecutively.

Brother MFC-9140CDN Specifications

General

Print technology	LED
Maximum resolution	600 x 2400 DPI
Economical printing	Yes
Duplex printing mode	Auto
Warm-up time (from sleep mode)	24 s
Time to first page (black, normal)	16 s
Print speed (black, normal quality, A4/US Letter)	22 ppm
Duplex print speed (black, normal quality, A4/US Letter)	3.5 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4, 9, 16, 25
Time to first copy (black, normal)	19 s
Time to first copy (color, normal)	22 s
Copy speed (black, normal quality, A4)	22 cpm
Scan to	E-mail, E-mail Server, File, FTP, Image, OCR
Scan drivers	ICA, ISIS, TWAIN, WIA
Scanner type	Flatbed & ADF scanner
Film scanning	No
Grayscale levels	256
Input color depth	48 bit
Maximum scan area	216 x 356 mm
Output color depth	24 bit
Image formats supported	JPG, PNG, TIF
Maximum scan resolution	19200 x 19200 DPI
Document formats supported	PDF
Optical scanning resolution	1200 x 2400 DPI
Faxing	Color faxing
Fax memory	500 pages
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax transmission speed	2 sec/page
Fax speed dialing (max numbers)	200
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	- pages per month
Recommended duty cycle	300 - 1500 pages per month
Number of print cartridges	4
Page description languages	BR-Script 3, PCL 6
Paper input type	Paper tray
Total input capacity	250 sheets
Total output capacity	100 sheets
Auto document feeder (ADF) input capacity	35 sheets
Custom media width	76.2 - 215.9 mm
Custom media length	116 - 355.6 mm
Paper tray media types	Glossy paper, Heavy paper, Labels, Plain paper, Pre-Printed, Recycled paper, Thin paper
Paper tray media weight	60 - 105 g/m²
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	64 - 90 g/m²
Display	TFT
Control type	Touch
Product color	Black, White
Display diagonal	3.7 \
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
Wi-Fi	-
Cabling technology	10/100Base-T(X)
Security algorithms	HTTPS, SSL/TLS
Ethernet LAN data rates	10, 100 Mbit/s
Mobile printing technologies	Apple AirPrint, Google Cloud Print
Sound power level (standby)	33 dB
Sound pressure level (printing)	53 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.05 W
Power consumption (standby)	70 W
Power consumption (PowerSave)	7.5 W
Power consumption (average operating)	380 W
Package depth	534 mm
Package width	602 mm
Package height	565 mm
Package weight	27900 g
Mac operating systems supported	Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Server operating systems supported	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012
Sustainability certificates	Nordic Swan Ecolabel, Blue Angel, ENERGY STAR

Weight and Dimensions

Depth	483 mm
Width	410 mm