Confidential
2-12
Error
Code
Contents
Refer to
page:
42 Head voltage does not turn OFF. 2-36
43
Head thermistor defective
Head thermistor detects -20 degree-C or less and 80 degree-C or more when
power is on.
2-36
44 Head driver IC detects abnormal temperature during operation or stand-by. 2-37
46 Purge count or flushing count overflown. 2-37
48 Head flat cable detected to be not correctly inserted. 2-37
49 Head voltage does not raise. 2-38
4D Ink absorber full sensor harness detected to be not correctly inserted. 2-38
4F Head voltage drops too quick. 2-39
50 The purge cam switch is not switching ON/OFF. 2-39
52 Failed to detect the origin of the purge cam. 2-40
5A Abnormal stop of purge cam being driven 2-41
5B Pump of maintenance unit stopped abnormally during exhaustion/suction. 2-41
5D
Excessive current protection activated for the driver IC during purge cam
operation.
2-41
5E Excessive current protection activated for the driver IC during pump operation. 2-41
67 Switchback sensor detects no recording paper tray state. 2-42
75 Head/carriage unit cannot shift to head capping position. 2-43
76 Head/carriage unit cannot shift to head uncapping position. 2-43
7E Head property information not input. 2-43
80
Recording paper size error (during FAX/list printing)
Registration sensor, recording paper width sensor detect unspecified papers.
2-44
81
Recording paper size error (other than FAX/list printing)
Registration sensor detects papers smaller than specified size.
2-45
82
Paper jam
Recording paper width sensor cannot detect leading edge of recording papers.
2-45
84
Paper jam
Registration sensor stays in paper feeding state even after completion of paper
ejection action.
2-46
87
Paper jam
Switchback sensor stays in paper feeding state even after completion of paper
ejection action.
2-46
To Next Page
Loading...
Need help?
General
