Home > Introduction to Your Brother Machine > LCD Overview
LCD Overview
MFC-J460DW/MFC-J480DW/MFC-J485DW
This screen shows the machine’s status when the machine is idle. This Home screen is also called the Ready
Mode screen. When displayed, this indicates that your machine is Ready for the next command.
01. 01. 2016
FaxFax
0101
AM
1
346
2
5
1. Quiet Mode
The
(Quiet Mode) icon appears when the [Quiet Mode] setting is set to [On].
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes
slower.
2. Wireless Status
Each icon in the following table shows the wireless network status.
The wireless setting is disabled.
Wireless network is connected.
A three-level indicator in the LCD displays the current wireless signal strength.
The wireless access point cannot be detected.
You can configure wireless settings by pressing on the control panel. For more information, see the
Quick Setup Guide.
3. Ink
Displays the available ink volume.
When an ink cartridge is near the end of its life or having a problem, an error icon is displayed on the ink
color.
4. Date & Time
Displays the date and time set on the machine.
5. Faxes in memory
Displays how many received faxes are in the machine's memory.
6. Receive Mode
Displays the current Receive Mode.
• [Fax] (Fax Only)
• [F/T] (Fax/Tel)
• [TAD] (External TAD)
• [Mnl] (Manual)
When the Distinctive Ring feature is turned on, the LCD displays [D/R].
14
To Next Page
Loading...
Need help?
General
