Home > ControlCenter > ControlCenter4 (Windows
®
) > Set Up the Brother Machine Using ControlCenter4
(Windows
®
)
Set Up the Brother Machine Using ControlCenter4 (Windows
®
)
1. Click the (ControlCenter4) icon in the task tray, and then click Open.
2. Click the Device Settings tab.
3. Click the Remote Setup button.
4. Configure the settings as needed.
Export
Click to save the current configuration settings to a file.
Click Export to save your address book or all settings for your machine.
Import
Click to read the settings from a file.
Print
Click to print the selected items on the machine. You cannot print the data until it is uploaded to the
machine. Click Apply to upload the new data to the machine, and then click Print.
439
To Next Page
Loading...
