Brother MFC-J460DW - Additional Methods of Configuring Your Brother Machine for a Wireless Network

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network
Additional Methods of Configuring Your Brother Machine for a Wireless
Network
To connect your machine to your wireless network, we recommend using the Installation CD-ROM.
• Before Configuring Your Brother Machine for a Wireless Network
•
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup
™
(WPS) or AOSS
™
•
Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup
™
(WPS)
• Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
You must connect to a new SSID from your computer when it is configured for Ad-Hoc mode.
• Configure Your Machine for a Wireless Network Settings When the SSID is Not Broadcast
•
Use Wi-Fi Direct
®
382