Brother MFC-J460DW User Manual

Home > Routine Maintenance > Clean Your Brother Machine > Clean the Scanner
Clean the Scanner
1. Unplug the machine from the AC power outlet.
2. Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass cleaner.
2
1
3
3. In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with a non-
flammable glass cleaner. (ADF models only)
2
1
(ADF models only)
In addition to cleaning the scanner glass and glass strip with a non-flammable glass cleaner, run your
fingertip over the glass to see if you can feel anything on it. If you feel dirt or debris, clean the glass again
concentrating on that area. You may need to repeat the cleaning process three or four times. To test, make
a copy after each cleaning attempt.
When there is a spot of dirt or correction fluid on the glass strip, the printed sample shows a vertical line.
After the glass strip is cleaned, the vertical line is gone.
514

Brother MFC-J460DW Specifications

General

Print Technology	Inkjet
Max Print Resolution	6000 x 1200 dpi
Max Print Speed (Black)	12 ppm
Max Print Speed (Color)	10 ppm
Automatic Document Feeder	Yes
Duplex Printing	Yes
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Memory	128 MB
Fax Speed	14.4 kbps
Display	1.8" color LCD
Connectivity	USB
Scanner Type	Flatbed, ADF
Max Scan Resolution	1200 x 2400 dpi
Mobile Printing	Yes
Ink Cartridges	Black, Cyan, Magenta, Yellow