Brother MFC-J460DW User Manual

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup
™
(WPS)
Configure Your Machine for a Wireless Network Using the PIN Method
of Wi-Fi Protected Setup
™
(WPS)
If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN)
Method to configure your wireless network settings.
The PIN Method is one of the connection methods developed by the Wi-Fi Alliance
®
. By submitting a PIN
created by an Enrollee (your machine) to the Registrar (a device that manages the wireless LAN), you can set up
the wireless network and security settings. For more information on how to access WPS mode, see the
instructions provided with your wireless access point/router.
Type A
Connection when the wireless LAN access point/router (1) doubles as Registrar.
1
Type B
Connection when another device (2), such as a computer, is used as Registrar.
1
2
Routers or access points that support WPS are marked with this symbol:
>> MFC-J460DW/MFC-J480DW/MFC-J485DW
>> MFC-J680DW/MFC-J880DW/MFC-J885DW
MFC-J460DW/MFC-J480DW/MFC-J485DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [WLAN]. Press OK.
386

Brother MFC-J460DW Specifications

General

Print Technology	Inkjet
Max Print Resolution	6000 x 1200 dpi
Max Print Speed (Black)	12 ppm
Max Print Speed (Color)	10 ppm
Automatic Document Feeder	Yes
Duplex Printing	Yes
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan, Fax
Memory	128 MB
Fax Speed	14.4 kbps
Display	1.8" color LCD
Connectivity	USB
Scanner Type	Flatbed, ADF
Max Scan Resolution	1200 x 2400 dpi
Mobile Printing	Yes
Ink Cartridges	Black, Cyan, Magenta, Yellow