Brother MFC-J460DW

Home > Security > Lock the Machine Settings > About Using TX Lock
About Using TX Lock
Related Models: MFC-J460DW/MFC-J480DW/MFC-J485DW/MFC-J680DW
Block unauthorized data transmission to and from the machine.
TX Lock lets you prevent unauthorized access to the machine.
While TX Lock is On, the following operations are available:
• Receiving faxes
• Fax Forwarding (If Fax Forwarding was already On) (MFC-J680DW)
• Paging (If Paging was already On) (MFC-J680DW) (USA and Canada only)
• Fax Storage (If Fax Storage was already On) (MFC-J680DW)
• Remote Retrieval (If Fax Storage was already On) (MFC-J680DW)
• PC-Fax Receive (If PC-Fax Receive was already On)
While the TX Lock feature is turned on, your machine will receive faxes and store them in its memory. Then,
when TX Lock is turned off, the faxes will be sent to your chosen PC.
While TX Lock is On, the following operations are NOT available:
• Operation from the control panel
• PC printing
Related Information
• Lock the Machine Settings
• Set the TX Lock Password
• Change the TX Lock Password
• Turn TX Lock On/Off
420