To stop copying, press Stop/Exit.
MFC-J680DW/MFC-J880DW/MFC-J885DW
1. Make sure you have loaded the correct size paper in the paper tray.
2. Do one of the following:
• Place the document face down on the scanner glass.
• Place the document face down in the ADF. (ADF models only)
(If you are copying multiple pages, we recommend using the ADF.)
3. Press [Copy].
The Touchscreen displays:
4. Change the copy settings, if needed.
• When you load paper other than Letter size Plain Paper, you must change the [Paper Size] and
[Paper Type] settings by pressing the [Options] button.
200
To Next Page
Loading...
